Experience of Vaporesso XTRA AIO Pod Kit 900mAh 2ml

I’ve get Vaporesso XTRA AIO Pod Kit 900mAh 2ml for a couple of weeks now which i’m thoroughly impressed by just how well this pod works. The new Vaporesso Xtra follows the drop by pod approach to its design, with easy to swap magnetic base pod cartridges, but that’s where the pod device similarities end. a singular shape, fantastic flavor production, unprecedented material, and durable 900mAh battery make the Xtra my top pick because the only pod device of the year so far!
So let’s get into it already, I’m sure you’re wanting to hear why the Xtra is such a fantastic pod device!
The Vaporesso Xtra brings an entire New Look to the pod device world, from its asymmetrical rounded edges to the unique fabric material, I can’t say enough goodies about how the Xtra is meant . the primary thing I noticed once I pulled this device out of its box was the woven texture on the non-metallic side of the pod. I can’t consider one vape device out there that utilizes a cloth material as decorative design and I’m loving it. There’s a satisfying textured feel to running your fingers across the surface of the pod, smoothy transitioning from a slick metallic finish to the silk-like fabric panels.
The rounded edge, while slightly funny watching first, makes complete sense once you decide on up the device. It’s designed in such the thanks to contour to the within curve of your fingers while you hold it. It even comes equipped with a sturdy attachment point for lanyards so you’ll wear it around your neck during hiking and vape hands-free if you’d wish to .
One puff off the Vaporesso Xtra had me sold on the coil quality. I’m unsure what cotton they’re using, but whatever it’s that’s within the coils is giving the Xtra crystal clear E-Liquid taste. i attempted a couple of of varied vape juice flavors with this pod, starting from tropical fruit to sweet dessert, and each time i used to be getting almost the precise same flavor as i’d from dripping those flavors onto an RDA. If you’re a flavor chaser looking to exchange your Uwell Caliburn I’d say give the Xtra a try, the flavour production is true on par with the Caliburn/Koko pods. Vaporesso XTRA Replacement Meshed
A long-lasting 900mAh internal battery provides hours of power for all of your vaping needs. Actually, unless you’re vaping 50mg salt nic 24/7, you would like to seek out that the Xtra lasts about 2-3 days in-between recharging.
So as far as pod devices go i feel I’ve made my opinions clear over the last few years. The GeekVape Biden, with its dual coil cartridges, had the sole flavor production out of any pod device at the time. Then came the Caliburn and Koko pod devices from Uwell and suddenly you’ll get almost nearly nearly nearly as good of a flavor profile because the Bident without trading in kidneys to buy for coils. Now with the Xtra, i feel it’s time to feature another device to my better of pods list, this is often often often one among the few vaping devices that I gave full 5/5 marks for once i wont to be doing internal testing. I highly recommend you check the Vaporesso Xtra out when it hits our shelves.

YUHETEC 8-in-1 Vape Coil

The Xtra is pod mod that’s made up of metal, unlike the plastic of the Osmall. The C-frame chrome body features a thick rubberized resin decal that elevates the planning and increases the security of your grip. The decal part could even be slightly cheap though. If you’re a picker like me, you’d possibly want to remain away from the edges of the sticker. Luckily it feels good within the hand and it’s well placed. The Xtra overall could even be a good-looking little pod mod. kind of the colors are often a fingerprint magnet, but the execution is tasteful.
Although the name of the device suggests otherwise, the Xtra is actually shorter than the Osmall, but much heavier. The Osmall is under 25 g and thus the Xtra is 60 g. It only measures 14 mm x 37 mm x 64 mm. I should means there’s an influence button on the lowest of the device. It’s not for firing; it’s just an on/off button turned on via a quick 5-click.
The kit comes with both Unipods, a Meshed 0.8-ohm loose MTL and a 1.2-ohm MTL (at least that’s how its advertised). The mouthpiece is analogous to the Osmall and derivative of the Renova Zero and SMPO, but much smaller. Also, the pods have a satisfying refill plug that cannot be totally removed, unlike the Osmall. The low resistance coil features a red plug and thus the MTL coil features a gray plug. i prefer that clear distinction between the two pods. The resistance is additionally written on the side of the pod opposite the plug.
Under the plug could even be a refill opening measuring about 3.5 mm x 5 mm. I’ve been filling it with pipette droppers and haven’t had a drag , though using high VG requires you to kinda snake the liquid in at an angle. All modern droppers like unicorns work perfectly no matter the viscosity of juice used.
The Unipods are magnetized drop in pods. They’re easy to urge obviate yet held in firmly thanks to a deeper seating and larger diameter magnets. this is often often often often an area I’m happy to figure out Vaporesso improve on. Their previous devices like this had magnets so weak they’d fall out if you said “boo.” I can devour the whole Xtra—all 60 grams of it—by the pod without the magnets failing. Even with fairly vigorous shaking, it stays connected. Of course, there’s limits and it’s not meant to be held like that. Also, there’s slightly of flexibility with the pod within the pod housing. It’s not enough to even be a con on behalf of me though because it only wiggles once you plan to look the hay . When you’re just taking successful or just holding it in between your lips, it doesn’t stationary.
The Xtra has been performing well, though I had hoped for the same performance on the 1.2-ohm coil as I got from the Osmall. I wasn’t sure what the performance might be with the Meshed 0.8-ohm coil, but i wont to make sure the MTL would be my favorite. Okay, so i wont to be wrong.
Meshed 0.8-ohm coil: Warm, clean, and fairly saturated flavor for such slightly device. Even with long drags, the flavour doesn’t get distorted. It wicks well like most mesh coils, but I’d recommend keeping ratios within the 50%-70% VG range. Another aspect that performs well with this coil is that the airflow. It’s a loose MTL that stays in its lane! It’s not slightly a bit like the Mi-Pod which struggles to understand that perfect middle ground of a loose MTL. i feel Vaporesso nailed this draw! i prefer better to recommend keeping nicotine to a max of 12 mg. Even you opt for 6 mg, it can still provides a solid throat hit…which is extremely good thing!
MTL 1.2-ohm coil: Though the specs are the same and thus the coils inside the pod look the same because the Osmall, the performance isn’t the same . And, frankly, I can’t tell a difference between the draw of this and thus the Meshed 0.8-ohm coil. I’d go so far on say that from the few pods that I’ve tried, the 1.2-ohm pod feels looser than the Meshed version. Either way, i feel this MTL is simply too loose especially for a single-strand coil. It wicks best with 50/50 and I’d recommend this with high nic up to 24 mg/mL or salts up to 36 mg/mL. the flavour is decent, but forgettable.
There haven’t been any hiccups with the Xtra pods. No leaking, spitting or flooding, though I haven’t tried to throw every viscosity at these coils like I did with the Osmall. I’d imagine you’d get flooding or gurgling with thin juice within the Meshed pods. Thin juice is fairly rare lately , so that’s not much of a priority . My main issue is that the 1.2-ohm coils struggle to put out notable flavor compared to the Osmall’s equivalent. But what the Xtra lacks in strict MTL vaping, it makes up for it with a flavorful loose MTL with the 0.8-ohm coils.
The Xtra charges through a micro USB port. I would’ve preferred a USB-C. But it’s pass-thru charging and an LED indicator to remain you clear on the status of your battery. Green is full, blue is midway, and red is almost depleted.
I’ve been impressed and fairly satisfied with the Xtra. The battery life is substantial for the power it pushes, the planning is clean, and thus the mesh pod satisfies. albeit i wont to be more interested in the MTL coils, because it seems , the Meshed coil was the star of the kit on behalf of me . I’m comfortable in recommending this device to anyone that prefers a loose MTL. albeit you don’t usually use pod devices, this could be a solid copy .

Vaporesso GTX One Vape Mod Comment

“GTX ONE may be a user-friendly MTL kit equipping GTX coils that give fresh flavour-boosting and rich cloud delivery. With an airflow system of the GTX TANK 18, it keeps the entire vaping catering to your required expectation. Furthermore, featuring Max 40W adjustable power supporting smart VW mode, the GTX ONE provides impressive vaping experience throughout. The 2000mAh built-in big battery comes with 2A Type-C USB allows longer endurance also as easier recharging. Leading the various others on flavour exploring journey, the compact GTX ONE is that the one that matches perfectly.” Vaporesso GTX One Vape Mod 2000mAh 40W
Without a spoiler alert I can honestly say Vaporesso’s description is totally honest and zip i might dispute, obviously slightly embellished but that’s to be expected from an advertising pitch.
GTX Coils
Adjustable Airflow & Power
Smart Variable Wattage
2000mAh Inbuilt Battery
2A USB Type-C Fast Charging
0.69” OLED Screen
Compact Ergonomic Design
Scratch-free Cover
18mm Diameter GTX ONE Tank
3ml (2ml TPD) Capacity
I will cover the above in additional detail later.
The GTX ONE kit comes within the customary quality and simplistic style box, the rear of the box lists the specs and therefore the box contents along side the scratch and check authenticity label. I don’t think I even have checked one among these for years but having received this kit from Vaporesso direct then i’m pretty confident its genuine!
There are not any notches within the lid so it’s a shake the bejesus out of it to open affair. Once you’ve got it open, you’re greeted with the highest layer containing the mod/battery, 18mm tank (0.8Ω Mesh preinstalled), and a spare straight glass with a baggie of spare seals. Lifting the highest compartment out, there’s another section containing the extra coil which is that the latest 1.2Ω Mesh coil. there’s a really top quality USB-C cable included and therefore the documentation within the sort of a rather thick, multi-language reference book is well detailed and illustrated.
rall the contents and packaging is spot on, no surprises but everything you’ll and will expect with a kit and zip omitted. Here’s the contents list:
I wasn’t expecting the GTX ONE kit within the least and it had been a mystery package in the post but I even have to admit i used to be delighted to what was inside. Bear in mind i used to be left wanting when it came to a real MTL adjustable airflow option using the GTX coils, the PM30 uses an equivalent coils but the airflow was just too loose on behalf of me . The last decent adjustable airflow MTL offering from Vaporesso was the Orca Solo Plus which I enjoyed, but when the new GTX coils came out and that i experienced the flavour from devices just like the XTRA pod, then it soon fell out of favour.
On the face of it the GTX ONE kit was EXACTLY what I had been looking for , even the color choice was to my personal preference. It’s not fairly often i buy excited by a replacement kit, but i used to be impatient to urge this kit photographed so I could get my grubby mitts thereon to vape.
While photographing, I had the prospect to look at the kits components, a couple of things that grabbed my attention that I liked:
The mod seemed a touch tall for a MTL (Mouth To Lung) offering, it’s noticeably taller than say the Target Mini 2 and about an equivalent height because the Target PM30, but it’s lighter and much easier within the hand. The textured coating felt really grippy and almost like the newest Gen and Swag mods.Vaporesso Renova Zero Pod Cartridge 2PCS
The all new GTX ONE 18mm tank was a moment like with its looks and size. Though it came with the 3ml bubble glass already fitted, I popped the 2ml straight glass on. i feel I prefer the straight glass but the bubble didn’t look too out of place either and a minimum of you get the choice (unless you get the TPD version). i actually just like the 510 drip tip as it’s a correct narrow bore MTL mouthpiece and is comfortable. The dominant black silicone seals actually increase the styling with the matching black tip. the most thing i used to be curious about were the GTX coils during a tank – at last!
I was already a lover of the new GTX coils for DTL (Direct Lung) within the PM80, the flavour and vapour from the subohm mesh coils are freakin’ superb. Not only that, but they last rather well . Having tested the MTL 1.2Ω regular and mesh within the PM30, I loved the flavour but the airflow was too loose on behalf of me therefore the GTX ONE tank should be a certainty .
*Compatibility Caution*
The only confusing thing is that not ALL GTX coils fit the GTX ONE tank. If you’re taking a glance at the compatibility chart below, you’ll notice the most difference; the lip under the lower seal is slightly larger and therefore the more obvious one is that the top. The incompatible coils are female fitting and therefore the newer compatible ones are male.
Now for pure MTL, this is often not a drag in the least because the only coils you’ll likely want to use are the four that are compatible, but it’s to travel down as a con as a more moderen vaper might get caught out when buying GTX coils. Vapefly Jester Vape Pod System Meshed Edition 1000mAh 2ml
The moment I had been expecting after getting the photos out of the way, I unscrewed the tank and fitted the 1.2Ω Mesh coil as that was the most one i used to be curious about . you’ll unscrew the bottom without taking the tank fully apart, the coil is Plug-n-Play press fit and really easy to swap. Priming the coil with a couple of drops of eliquid first is suggested , then screw the bottom back on.
Filling wasn’t as convenient as i might have liked. this is often done by unscrewing the highest cap, on the plus side you’ve got plenty of room to fill it up with none airlocks but you are doing need to confirm you don’t overfill or spill any juice into the coil bore. Once filled, simply screw the highest cap back on. It’s simple enough and easier than bottom filling old-school tanks, but it are often quite messy when out and about meaning you’ve got to carry the damp top cap in your hand. i assume i’m spoilt with latest generation slide to fill or maybe Vaporesso’s PTF filling.
Setting the airflow is completed via the AFC ring at the bottom of the tank. I found only one hole exposed was a pleasant tight draw, better still partially close one hole for a good tighter draw.
Once filled and allowing it 10-15 minutes to prime the coil, then it’s good to travel . Before you go hitting the hearth button, select your required wattage. By default, the wattage is about to five Watts, the 1.2Ω coil sweet spot was just about spot on to Vaporesso’s recommended wattage of 11 Watts, though my OCD had to vary it to 11.1 Watts. that basically is all you would like to try to to , dial within the wattage and vape.
As a beginner or a technophobe, then that’s really all you would like to recollect , but if you wish options then the primary (and only) option I enjoyed is that the SMART VW, basically this detects the coil that’s fitted and sets the wattage automatically to the recommended power.
*NOTE* For this feature to figure you’ll got to unscrew the tank and screw it back on again to detect the coil.
The menu and controls are very simple and appear to be aimed toward newer users, there’s no fancy features like temperature control (TC), bypass (BP) or maybe preheat settings which could postpone advanced users, personally I didn’t find this a con once I considered that the GTX ONE kit is meant to be an easy and effective fire and forget mod and tank. Most users don’t use advanced features, and for MTL vaping few of the advanced features make much difference.
The small OLED screen is extremely basic with the bare minimum of details on screen, it’s nice and bright and almost visible in daylight, overall no complaints here.
So anyway, back to the performance. Despite my already high expectations, it exceeded them and gave that rare WOW! factor. Finally I had found a pod beating MTL setup. It just about eliminated all my MTL stock coil tanks and AIOs (All in One) in one sweep.
I know too well that the shiny new toy novelty factor must be taken under consideration and that i tried to not get too excited by it. The flavour from the 1.2Ω mesh coil is superb . For anyone that has tried the OSMALL or XTRA then it’s considerably on par with those, vapour production is sweet and therefore the airflow is extremely smooth. At the recommended wattage, the vape is good and warm and keeps up well when chain vaping. Turning the wattage up to fifteen watts was obviously an excessive amount of because the vape got uncomfortable.
I absolutely hammered the primary coil and never got a touch of a dry hit. Flavour lasted goodbye and, as I wanted to check the 0.8Ω mesh coil, i ultimately swapped it over. I didn’t expect to enjoy the 0.8Ω mesh for MTL as once I tried this feature of the XTRA pod it had been more suited to DL (Direct Lung) vaping with a wider airflow, but i used to be to be proved wrong because it was a much more intense MTL vape, warm and it delivered such an honest throat hit using 6mg freebase. Equally I got a very good DL hit once I opened the airflow and therefore the vapour production was impressive, seems this coil may be a great all-rounder.
Though it wasn’t included within the kit, I also tested the 1.2Ω regular coil as a part of my GTX Coil review, I can’t quite put my finger thereon but i feel I prefer the regular over the mesh for a more traditional MTL vape. This was slightly surprising as I always considered mesh as king for flavour, but both 1.2Ω coils were equal though they offered a rather different vape, one worth consideration once you are ordering new GTX coils.
Lifespan of the included coils is great . I actually had to offer abreast of them because it would are too long to attend and obtain the review out. As it was, I’ve had over four weeks of normal to excessive use.
Vaporesso are certainly on a appear 2020. They were already churning out some great products (GEN, SWAG 2, PM80 etc.), except for me the most advancement has been with their coils and new wick making the bulk of latest products really stand out. Flavour and lifespan is what we’ve been crying out for, and Vaporesso appear to be listening.
Back onto the GTX ONE, this kit exceeded my wishes for a correct MTL stock coil tank and mod, adjustable airflow, simple, ergonomic, compact and lightweight enough to be pocket friendly with full bodied flavour.
For me, I don’t think the GTX ONE mod or tank are game changing for features or design, don’t get me wrong i feel they both look superb but I see them as re-inventing the wheel with superb refinements and getting it mostly right.
Bottom line is I genuinely love this kit and it’s a really welcome return to mod and tank setups for people who don’t like pods and AIOs. I actually enjoy decent pods, but you can’t beat a correct mod and tank, and that i can’t consider any pod that beats the GTX ONE’s vape quality for MTL.

 

Vaporesso Renova Zero My Points

The Renova Zero pod system has an elongated oval shape, measures 31mm x 13.5mm x 80mm and is primarily made from zinc alloy. I received the orange version for this review – which looks absolutely stunning – but the device comes in nine different colors, all of which have a matte finish that minimizes fingerprint staining. Design-wise, the Renova Zero jogs my memory many the Wismec Motiv 2 pod system. In fact, the primary time I saw the Zero, i used to be convinced that it had been Wismec’s newest generation vape pod, but it seems that the similar design is that the only thing these two devices have in common. Smok Nord Kit Pod System
Like most pod systems, the new Renova Zero is formed from the battery section and a detachable, refillable pod. The pod has magnetic contacts on rock bottom , so you want only drop it into the loading bay on the battery and it snaps into place. It’s draw activated, so all you’d wish to aim to to is suck on the mouthpiece of the pod after you’ve filled it and it’ll start to heat the coil inside. But first, you’d wish to point out it on, which leads us thereto tiny button on the battery.
The overwhelming majority of pod systems are automatic, so as that they don’t have any buttons, but the Zero by Renova could even be slightly different. It’s also an automatic, regulated vaping device, but it also features alittle round button on the battery which does some cool stuff. First of all, you’ll click that tiny button five times in rapid succession to means the battery on or off. this allows you to draw on the mouthpiece without accidentally activating the battery, just just just just in case you’d wish to ascertain something. But there’s tons more thereto than that.
One of the items that sets the Renova Zero aside from virtually all other pod systems is that the built-in variable wattage feature. Pressing that very same plastic button 3 times rapidly, will cause the colour of the build-in LED to chance to either green, blue or yellow, each kind of a special wattage level. Green is 12.5W, blue is 10.5W and red is 9W. Although there’s no due to adjust the airflow on this device, the variable wattage function allows you to manage the vapor production also because the temperature of the vapor. The differences between the three available settings aren’t huge, but thy are definitely noticeable. Simply pressing the button just one occasion will cause it to illuminate in one among the three colors (green, blue, red) letting you recognize the wattage level it’s currently at, so you’ll change it if you’d wish to .
The button on the battery also acts as a classic battery level indicator. It lights up whenever you draw on the mouthpiece of the pod, and thus the color it lights up in corresponds to the facility left within the battery. A green light allows you to know that battery life is over 70 percent, blue means it’s between 70 percent and 30 percent, while red means it’s under 30 percent. The Renova Zero could even be a regulated vaping device, so you shouldn’t notice any difference in power output no matter battery life. However, when the battery is almost depleted, you’ll definitely notice a drop by vapor production.
There’s more innovation during this small button of the Renova Zero than I’ve seen altogether pods I’ve reviewed, but there’s actually more to travel over. as an example , the Zero pods have an innovative push-to-fill refilling system which eliminates the necessity for rubber plugs. Basically, there’s this small metallic funnel on rock bottom of the pods which you’d wish to depress on when filling. It actually requires some pressure, so pressing down with a glass dropper isn’t advisable, because it’s getting to crack, so Renova actually included a fine tip refill bottle. If you’ve already got one among those thin tip unicorn or gorilla bottles, you don’t actually need the included refill bottle, but it’s nice that they’re offering it anyway.
This innovative refill system has been working excellently thus far . albeit there’s no visible plug stopping the juice from leaking out of the pod, the fill port is as dry as a bone immediately , so I’m willing to bet that we’ll be seeing more of it within the long run . Vaporesso Renova Zero Pod Cartridge
Finally, the Omni Board Mini chip powering the Renova Zero also features temperature control technology, which I’ve never seen used on a pod system before. While you’re unable to line the temperature or the TCR, like on advanced vape mods, this handy feature prevents users from accidentally burning the coil inside the refillable pod and thus ruining it. When the chip detects that there isn’t enough e-liquid left inside the pod to saturate the wick round the ceramic coil, it cuts off power from the battery. That’s one among the good features I’ve seen on a pod system, and definitely one I’d wish to ascertain implemented on other devices also .
All in all, from the ergonomic, pocket-friendly design and quality paint job, to the multitude of innovative features, the Renova Zero vape pod left me impressed. In fact, it’s so initially else I’ve used that I’m having trouble even comparing it to other pod systems.
The Renova Zero is shorter than the Wismec Motiv 2 and slightly thinner than the SMOK Novo vape pod, so i used to be surprised that it’s a considerably higher battery capacity. The Zero features a 650mAh built-in battery which is nothing in need of wonderful for a tool this compact. How long it’ll last you depends on a variety of things , from what proportion you vape to what wattage putput you’re using it in, but one thing is needless to say , it’ll keep you vaping tons longer than the 150mAh JUUL.
You’ll even be happy to understand that the Renova Zero features fast-charging technology (1 amp charging rate) which allows you to completely recharge the battery in about 45 minutes. If that’s still too long, you’ll also use it while it’s charging, which may be a huge plus, considering many vape pods don’t have passthrough functionality.
I’ve been using the Renova Zero for nearly hebdomadally , then far I’ve been very pleased with the way it’s been performing. The draw is what i’d call middle-of-the-road, to not loose, not too tight, which is essentially ideal for such a customizable device. Having too tight a draw would have negated the potential of the adjustable wattage function, a minimum of in terms of vapor production, and making it too airy would have made it disappointing for mouth-to-lung vapers. This way, it’s an honest compromise which may please most users.
The Renova Zero pods accompany a built-in 1-ohm ceramic Ccell coil which really brings out the flavour of the e-liquid. It’s not nearly nearly nearly as good as a triple mesh-coil tank, a touch just like the Freemax Mesh Pro, but compared to other pod systems, the taste is extremely clean. Another advantage of this ceramic coil is that it’s alleged to last longer than cotton wicked ones. I’ve only been using it for every week , but I expect to urge a minimum of another seven days out of it, especially since i’m employing a transparent , very lightly sweetened juice.
One thing to stay in mind with the Renova Zero is that when using it at max power output (12.5W), it tends to burn through e-liquid tons faster than regular pod systems. You get some impressive plumes of vapor, but you’ve to buy for them in e-liquid.
As I already mentioned, I’ve had no leaking issues with this device, the coil has been holding up well and flavor is best than I expected. One very small con would be that the draw activated switch isn’t the foremost sensitive I’ve seen, so you actually need to suck on the mouthpiece of the pod to activate the battery. But aside from that, I even have no problems to report.
I’ve used dozens of pod systems within the last year alone, and I’ve liked some quite others, but aside from the standard differences in design airflow and battery capacity, there wasn’t tons setting them apart. The Renova Zero is during a league of its own therein regard. Not only is it a solid device that basically performs alright , but it also introduces some truly innovative features, from the new push-to-fill system, to the variable power output and temperature control. this is often often often without a doubt the foremost advanced vape pod system I even have ever used, which alone is worth your money.
The Renova Zero was sent to me by Buy Best, for the aim of this review. They currently have it on sale for just $17.99.

My Review MECHLYFE Replacement RBA Coil Head

The first Impressions for Voopoo Vinci and Vinci X Devices
Both the RBA Coils are very very small in size with the Build Deck even smaller. Both of these cost around 4-5 USD each. Both come with Spares and Coils in the Box with a little cotton, a Screwdriver and Spare Build Deck Screws. Both RBA’s have 510 connections so you can dry burn and remove hotspots on a Mod.
Plug and Play VXV 510 Adapter
Both RBA’s come with Bottom Adjustable Airflow control , (However i noticed that on the Yachtvape RBA you cango a bit more Tighter Draw than the Mechlyfe which has a Medium loose MTL Draw)The max Build Diameter you can go is 2.5mm , but 2mm would be perfect in my humble opinion.Little Difficult to Build as the screws are too tiny, but very easy to wick both RBA’s
Performance about them VOOPOO VINCI X Pod
Coil wire used – Coilology 28/40g N80 Wire (5-6 Wraps) 2mm ID (0.5 ohm at 15 Watts and 1.0 ohm at 12 Watts ) The Mechlyfe and Yachtvape RBA’s offer All round Excellent Flavor and Throat hit.
i have been using them both on the Voopoo Vinci 40watts and the Vinci X with 70:30 and 60:40 (12mg) ratio eliquids from the last 4 days now and there are zero issues whatsoever.
both the RBA’s have Zero leakage issues / no gurgling / no spitback till now.
The only noticeable difference between the Two RBA’s are, on the Yachtvape RBA you can adjust the airflow to a tight draw but the flavor and vapor suffer, hence i kept it medium loose and its been perfect.

Review Ehpro Cold Steel 100 Using Experience

Cold steel 100 is essentially a tube mod, but with rectangular blocks protruding from the sides. I think this is where fleas and all electronics. Ambitionz vaper written directly on top of the rectangular housing part, forgetting that it has been designed. This construction is different from the second tube or mod mod box and not a mixture of both. I admit that the thought first it seems a bit odd, but the design was more in me.

to keep one of the main reasons is because it is very easy. Just hand it is convenient and not comfortable in the least. Furthermore, if the trigger for index finger or thumb for the purpose of the press in an ideal position. Cold Steel 200

It consists of a combination of zinc alloy, brass and stainless steel, so it is a bit on the side hard. 178grams weight without the battery, but the weight does not really bother me; MOD feel much stronger and indestructible. I did not fall, but I think perhaps survival is fine if I do.

Given its size, it is a little shorter and thinner than average eJuice and 60ml bottles. I think it’s mod perfect size for a single battery case … Or mod Tube … Anyway, it was a good size!

So I never tested the product Ehpro my first experience with excellent build quality and happiness. This table is well maintained and comfort feels well built and solid. Even the “COLD STEEL” is made on the basis of the MOD clear and precise printing.

Plate 510 in tank 25 mm without extension folder, so it is large enough to accommodate most atomizer. tank 26mm slightly in spite of the position.

There are only three buttons on cold steel 100 and the change to the gap of the tube in a rectangular cross section. One of them is the fire button and the other two are for the setting. Button Wiggle bunting, but strong enough to dial a number. But they are very sensitive and works without problems.

I could not get a spot size OLED screens is collected, but it was small. Is it a black and white display for easy but amazingly bright and clear OLED. It has the basic information such as vaping mode, temperature / current, the battery, the resistance and voltage.

IJOY Captain V Tank

IJOY Captain V Tank 5ml

Description:
Captain V Tank is a sub ohm tank that is suitable for Captain 2 Box Mod Kit. It can hold 5ml e-juice capacity which is large enough for your whole day vaping. And it adopts leakproof design and convenient top filling system, both of which will save you a lot of trouble. Besides, it utilizes dual slotted bottom airflow for smooth flavor. What’s more, with X3 coils, it also supports DM coils and MESH coils to meet your different vaping demands.

Main Features:
1. 5ml large e-juice capacity with top filling system
2. Adopts leakproof design
3. Compatible with multiple coils, like X3 coils, DM coils and MESH coils
4. Utilizes dual slotted bottom airflow

Specifications:
Brand: IJOY
Product Name: Captain V Sub Ohm Tank
Size: Φ25*51mm
Capacity: 5ml
Fill type: Top-refill
Coil: X3-C1 coil(60-70w); X3-mesh coil(70-90w)

Package Contents:
1* Captain V Tank (X3-mesh coil pre-installed)
1* X3-C1 coil

Joyetech eGo AIO Starter Kit

Joyetech eGo AIO Starter Kit 1500mAh (10th Anniversary Edition)

Joyetech eGo AIO Starter Kit 7 Colors Available

Being all-in-one style, this Joyetech eGo AIO is as user-friendly as its first version but is a special edition of Joyetech 10th anniversary. Featuring vibrant LED tank lights and 1500mAh internal battery to pair with the anti-leaking TFTA structure. SS316-0.6ohm head, with stainless steel coil, supports mouth-to-lung inhale, creating great vaping experience of opuiie taste and vapor clouds. Beside the child lock design, a wealth of safety protection measures is included. The Joyetech eGo AIO is simple and easy to use. The Joyetech eGO AIO starter kit good for both starters and experienced vapers.

Joyetech eGo AIO Starter Kit Real Shots

Standard Configuration:
1 * eGo AIO (10th anniversary limited edition)
2 * BF SS316 0.6ohm head
1 * USB cable
1 * Manual
1 * Warranty card
1 * Warning card
Spare parts

Joyetech eGo AIO Starter Kit Exploded View

Specification:
Size: | 19.0*119.0mm
Colors: white, silver, black, mix 1, mix 2, mix 3, mix 4
Battery capacity: 1500mAh
Atomizer capacity: 2.0ml
Output: direct output

All-in-One style:
The eGo AIO applies all-in-one style with atomizer inserted inside, which is quite convenient to use.

Joyetech eGo AIO Starter Kit ButtonJoyetech eGo AIO Starter Kit Details

10th anniversary limited edition
To celebrate Joyetech 10th anniversary, we modified the origional eGo AIO. Make the legendary great again.

Joyetech eGo AIO Starter Kit 10th Anniversary Limited Edition

Child-lock for safetyThe atomizer cap is equipped with child-lock structure. That means you need to press down the top cap to unscrew.

Joyetech eGo AIO Starter Kit Cap

Dual circuit protectionThe eGo AIO applies two sets of battery protection circuit system, realizing overall battery protection of over-charging,over-current and over-discharging, which makes it more advanced and reliable.

Joyetech eGo AIO Starter Kit LED Light Changeable

Changeable LED lights
In power-off condition, long press the fire button to turn off the indicate light or shift among the color of red, yellow, green, blue, indigo, white or purple.

Joyetech eGo AIO Starter Kit More Color Options

E-juice fillingPress the cap to unscrew the atomizer cap, then inject thuwikc directly into the cambered slot. Do NOT fill over the max line or it’ll overflow when installing the atomizer head.

Joyetech eGo AIO Starter Kit Max Line

Adjustment of airflow
Rotating the ring on the atomizer cap clockwise or counterclockwise to adjust the air inflow.
The air inflow will be the largest when both signs match with each other. Rotate it 90 degrees to the left or right will reach to the minimum air inflow.

Joyetech eGo AIO Starter Kit Specifications

Charging
Simply charge eGo AIO by connecting it with a computer or a wall adapter (output: DC 5V) via USB cable. When it’s fully charged, the button light will go out.

Joyetech eGo AIO Starter Kit Charging

‘Stop Is Suffering’: vaping Inventor Interviewed

Hon Lik, life-saving inventor of the e-cigarette, on why he did it

Few people have heard of Hon Lik, which may be a pity because he’s probably saved more lives already than anybody else I even have met. Twelve years ago, he invented vaping — the thought of getting nicotine vapour from an device instead of a miniature bonfire between your lips. Vaping is driving smoking out at a unprecedented rate, promising to realize what decades of public health measures have largely did not do. And it’s doing so without official encouragement, indeed with some official resistance.

Via an interpreter, and sucking on an electronic pipe, Mr Hon told me how it happened. And here is that the key point, the one that panjandrums of public health still seem to miss. He invented vaping so as to prevent smoking, and that is what it’s used for today.

He says he was smoking two packs of cigarettes each day while working as a chemist at the Liaoning Provincial Institute of Traditional Chinese Medicine. He thought: ‘How am i able to quit?’ He tried cold turkey several times and failed. In 2001 he tried a nicotine patch but it gave him nightmares when he forgot to require it off in the dark , and it did not replicate the initial rush of a cigarette.

Being a chemist with a penchant for electronics, he went into the laboratory and set about emulating the effect of smoke without a fireplace . The lab where he worked had an honest supply of pure nicotine, used for calibrating other products. He needed to seek out how to vaporise it instantly, and commenced with ultrasound, later turning to a component .

His first machine was a monster. By 2003 he had filed a patent on a smaller, more practical model. ‘I already knew it might be a revolutionary product,’ he told me with a smile. ‘Some in China have called it the fifth invention — after navigation, gunpowder, printing and paper,’ he laughs. ‘But that’s an excessive amount of .’

He visited work on miniaturising the device further, and refining the mechanism for vaporising nicotine in response to a puff. Why did he roll in the hay , I asked. ‘To solve a social problem,’ he replied. ‘Quitting is suffering.’

After eight months of toxicology testing by the Pharmaceutical Authority in Liaoning and by the Chinese military’s medical institute, the merchandise went on sale. There was modest interest in China, but it had been only firms began selling versions in Europe and North America, about eight years ago, that the vaping revolution took off.

Today quite 1,000,000 smokers in Britain have quit by using e-cigarettes, and a minimum of another million have hamper the amount is growing all the time, and it’s now easily the foremost popular method of quitting tobacco. meaning tons less carcinoma heart condition , stinky clothing and fire risk. What’s more, none of those people had to urge a prescription, or be subsidised by the taxpayer or treated by the NHS, like other methods of quitting like patches, gum, psychiatry or acupuncture. it is a purely voluntary, private-sector solution.

You would think the general public health authorities would be shouting this from the rooftops, but the Welsh government is trying to ban the utilization of e-cigarettes in enclosed public spaces, British Medical Association remains implacably disapproving, the planet Health Organisation censorious, and therefore the European Commission assail banning refillable versions. …

What Do We Know about E-Cigarette!

As a pulmonologist with the San Diego Veteran’s Affairs hospital, Laura Crotty Alexander has probably answered every possible question about smoking. Whether her patients were trying to find ways to quit or just wondering whether their current health problems could be associated with smoking, Crotty Alexander provided answers.

A couple of years ago, however, her patients began asking new questions: Are electronic cigarettes safer than conventional cigarettes, and will they switch? “I did not have the answers. As a physician and a researcher, that was very frustrating,” Crotty Alexander says.

Physicianeverywhere the country are encountering an equivalent questions from their patients. Out of nowhere, it seems, e-cigarettes–or electronic nicotine delivery systems, as they’re formally known–are appearing at gas stations, convenience stores, and anywhere else cigarettes are sold. Advertisements claim e-cigarettes offer health benefits by helping smokers quit. All e-cigarette users inhale is “harmless water vapour .” (1) The e-cigarette, it might seem, takes all the danger out of smoking.

Many environmental health scientists aren’t so sure. Maciej Goniewicz, a toxicologist at the Roswell Park Cancer Institute in Buffalo, New York, says, “This is vapor, but only alittle proportion of it’s water.” Mostly, he says, it’s made from propanediol and/or glycerin, the most ingredients within the “e-liquid” (or “e-juice”) that’s vaporized inside e-cigarettes. When heated, these solvents produce an aerosol resembling cigarette smoke. (2) Most e-liquids also contain flavorings and preservatives. (3,4)

“Most of what we all know about e-cigarettes is from lab studies,” Goniewicz says. “We do not know about the important health effects on the users of this product, especially on long-term users.”


The newness of e-cigarettes means longitudinal studies about potential health dangers are still within the distant future. Meanwhile, the prevailing literature about the security of the devices consists of small studies on e-liquids and e-cigarette emissions. It remains unknown exactly how e-cigarettes and their related secondhand smoke compare with conventional cigarettes.

Despite the shortage of health data, many researchers assume e-cigarettes are less dangerous than conventional cigarettes. Gerry Stimson, a public health scientist at Imperial College London, explains, “When you burn substance , you inhale many nasty things into your lungs.” Because e-cigarettes only heat a liquid instead of burning tobacco leaves, he says, it creates fewer hazardous particles which will be inhaled.

“The vapor doesn’t appear to be benign, but it does seem to be the lesser of two evils in comparison to cigarettes,” Crotty Alexander says.

Stimson adds, “At issue may be a matter of weighing up potential risks against potential health benefits. Small and sometimes not so small risks are related to all kinds of pharmacological and other health and social interventions, but the required precautionary principle must be weighed against potential benefits.”

Of course, saying something is safer than smoking cigarettes isn’t exactly setting a horizontal bar . The Centers for Disease Control and Prevention estimates that cigarette smoking causes one in five U.S. deaths annually , including deaths resulting from secondhand smoke exposure. (5) Smoking may be a leading risk think about chronic obstructive pulmonary disease, carcinoma , and disorder . (6) it is the leading preventable explanation for premature death within the us and one among the leading causes round the world. (6)

A Boom in Popularity

Against a backdrop of accelerating awareness of the health dangers of cigarettes and legal crackdowns on public smoking, Chinese pharmacist Hon Lik first developed an electronic alternative to traditional cigarettes in 2003. (7) E-cigarettes entered the U.S. market in 2007. (8)

The devices are available a spread of shapes and sizes, but all are variations on an equivalent general theme: A component at one end aerosolizes a liquid nicotine solution, and therefore the vapor is inhaled through a mouthpiece. …

IJOY Shogun Univ TC Mod Kit

IJOY Shogun Univ TC Mod Kit with Katana Tank 180W

Description:
IJOY Shogun Univ TC mod kit is an impressive TC Mod Kit which rounds the novel appearance and powerful performance up. 2 external 18650 batteries with max 180W output and bottom adjustable airflow system ensure longtime vaping and a strong throat hit. The 0.96inch display, big fire button and top filling system make a user-friendly experience from using to supplying. 6 colors come with different patterns, whichever will stand you out of the crowd!

Quick Links:
IJOY Sub-ohm Tank More Info
IJOY Shogun Univ TC Box Mod

Main Features:
1. 0.96inch display, beneficial to clear the real-time data
2. Made of resin and zinc alloy, subvert your perception over the touching feeling and texture
3. Triangular adjustable bottom airflow, easy to adapt the vaping to your preference
4. Powered by 2 18650 batteries ( not included )
5. Equipped with a USB port to supply the power and update the firmware
6. Top filling system, simplify the refilling
7. Big fire button, make it effortless to operate
8. 6 colors with unique patterns, distinctive and stylish.


Specifications:
Brand: IJOY
Model: Shogun Univ

Shogun Univ MOD
Screen: 0.96inch
Battery: 2 x 18650 batteries ( NOT included )
Battery Capacity: 6000mAh
Power Range: 5 – 180W
Resistance Range: 0.05 – 3.0 ohm
Temperature Range: 300 – 600 ¡ãH / 149 – 316
Output Current: 0 – 45A
Material: Zinc Alloy & Resin

Katana Tank
Capacity: 5.5ml
Compatible coil: KM1 Coil 0.2ohm, 40-80W, DM-M2 Coil 0.15ohm, 40-80W, DM-M3 Coil 0.13ohm, 50-90W(not included)
Drip tip: 810
Thread: 510

Product Size: 14.57 x 5.5 x 2.84 cm
Package Size: 16 x 10 x 6 cm
Product Weight: 0.24 kg
Package Weight: 0.353 kg

Package Contents:
1 x IJOY SHOGUN UNIV Mod, 1 x IJOY KATANA SUBOHM Tank, 1 x KM1 Coil 0.15ohm ( 40-80W Pre-installed ), 1 x DM-M2 Coil 0.15ohm ( 40-80W ), 1 x 4ml Replacement Glass, 1 x Tool Pack, 1 x USB Cable, 1 x Manual, 1 x Warranty Card